Up
Previous Next

Changing the Boot Sequence on HPE Hardware

If the rear view of your Sheriff CSM hardware looks similar to the below, it is built on an HPE ProLiant Server.

DL120 Gen9:

DL360 Gen10 with 1Gb interfaces:

DL360 Gen10 with 10Gb interfaces:

To configure a Sheriff CSM on HPE hardware to boot from a USB drive

1. Power on or restart Sheriff CSM.

2. Press the F9 key, when prompted, to enter System Utilities.

3. Select System Configuration and then BIOS/Platform Configuration (RBSU).

4. Select Boot Options and then Legacy BIOS Boot Order, press Enter.

5. Use the "+" or "-" key to move the USB entry to the top of the boot list.

6. Press F10 to save your changes.

7. Restart the server.

Note: The Sheriff CSM Remote Deputy hardware is built on HPE ProLiant DL20 Gen9 Servers, but you can follow the same procedure above to change the boot sequence.