You are here: Docs>Sheriff Web>UserGuides>SheriffCSMDocumentation>DeploymentGuide>SetUpTheManagementInterface (29 Aug 2021, SheriffCyberSecurity)Edit Attach
Up
Previous Next

Sheriff CSM™

Set Up the Management Interface

The first time you power on the Sheriff CSM hardware or launch the virtual machine console after the deployment, you must configure the management interface to establish network connection. You can configure the management interface manually or use DHCP (Dynamic Host Configuration Protocol). But after the initial setup, DHCP configuration is no longer available.

Important: When using DHCP configuration, you should create an address reservation for Sheriff CSM prior to configuration. To ensure proper functionality, Sheriff CSM requires a static IP address.

management interface initial setup

To configure the management interface using DHCP
  1. On the Sheriff Setup screen, select DHCP Configuration.

  2. Sheriff CSM displays the network settings assigned by your DHCP server. Press Enter to apply.

    Sheriff CSM configures the management interface and Sheriff services.

To configure the management interface manually
  1. On the Sheriff Setup screen, select Manual Configuration.

  2. Type the IP address and press Enter.

  3. Type the Netmask for the network and press Enter.

  4. Type the Gateway for the network and press Enter.

  5. Type the IP address of the DNS server and press Enter.

    Note: If you have multiple DNS servers, type each of their IP addresses separated by a comma.

  6. Verify the values you entered previously and press Enter.

    Sheriff CSM configures the management interface and Sheriff services.

Edit  | Attach | Print version | History: r13 < r12 < r11 < r10 | Backlinks | View wiki text | Edit wiki text | More topic actions
Topic revision: r13 - 29 Aug 2021, SheriffCyberSecurity
Copyright 2020 Sheriff Cyber Security, LLC. All rights reserved.