Up
Previous Next

Sheriff CSMâ„¢

Juniper SRX

When you configure Juniper SRX to send log data to Sheriff CSM, you can use the Juniper SRX plugin to translate raw log data into normalized events for analysis. The table below provides some basic information for the plugin:

Plugin Information

DeviceDetails
Vendor Juniper
Device Type Unified Threat Manager
Connection Type Syslog
Data Source Name juniper-srx
Data Source ID 1626

Integrating Juniper SRX

Before you configure the Juniper SRX integration, you must have the IP Address of the Sheriff CSM Sensor (Deputy). Follow the procedure for configuring Juniper SRX for syslog communication with Sheriff CSM using either Juniper SRX CLI or Juniper SRX JWeb.

SRX Console CLI

To configure syslog through the SRX console
  1. Launch SRX and open the CLI Console.
  2. Set the Sheriff CSM Sensor as the syslog host:

    set system syslog host
    <IP address of the Sheriff CSM Sensor>

SRX JWeb

To configure syslog through SRX JWeb
  1. Log in to the Juniper SRX device.
  2. Click Configure > CLI Tools > Point and Click CLI.

  3. Expand System and click Syslog.

  4. In the Host section of the Syslog page (bottom-right), click Add New Entry.

  5. Enter the IP address of the Sheriff CSM Sensor.

  6. Click Apply.

Integrating Juniper SRX

Before you configure the Juniper SRX integration, you must have the IP Address of the Sheriff CSM Sensor. Follow the procedure for configuring Juniper SRX for syslog communication with Sheriff CSM using either Juniper SRX CLI or Juniper SRX JWeb.

SRX Console CLI

To configure syslog through the SRX console
  1. Launch SRX and open the CLI Console.
  2. Set the Sheriff CSM Sensor as the syslog host:

    set system syslog host <IP address of the Sheriff CSM Sensor> 

SRX JWeb

To configure syslog through SRX JWeb
  1. Log in to the Juniper SRX device.
  2. Click Configure > CLI Tools > Point and Click CLI.

  3. Expand System and click Syslog.

  4. In the Host section of the Syslog page (bottom-right), click Add New Entry.

  5. Enter the IP address of the Sheriff CSM Sensor.

  6. Click Apply.

Plugin Enablement

For plugin enablement information, see Enable Plugins.

Troubleshooting

For troubleshooting, refer to the vendor documentation:

https://kb.juniper.net/InfoCenter/index?page=home

http://www.juniper.net/techpubs/en_US/junos12.1x46/information-products/pathway-pages/security/security-monitoring-and-troubleshooting-index.html
Topic revision: r8 - 29 Jun 2022, SheriffCyberSecurity
Copyright 2020 Sheriff Cyber Security, LLC. All rights reserved.