Up
Previous Next

Sheriff CSM™

Configure the Sheriff CSM Enterprise Server and Enterprise Database

The Sheriff CSM Enterprise Server component is hardware only, and ships with two devices: an Enterprise Server and an Enterprise Database.

The Enterprise Server needs to know the IP address and password of the Enterprise Database. Likewise, the Enterprise Database needs to know the IP address of the Enterprise Server. This information ensures that the two devices can communicate with each other.

Both configurations occur using the Sheriff Setup menu.

Task 1: Start the Sheriff CSM Enterprise Server Configuration

You should have already assigned an IP address to the Enterprise Server by following the procedure Set Up the Management Interface.

To start the Sheriff CSM Enterprise Server configuration

1. On the Sheriff Setup menu, use the Tab key to go to Configure Enterprise Server; press Enter (<OK>).

2. When the Sheriff MySQL Setup menu appears, move it to the background temporarily while you proceed with configuring the Sheriff CSM Enterprise Database.

   You will return to this later.

Task 2: Start the Sheriff CSM Enterprise Database Configuration

You should have already assigned an IP address to the Enterprise Database by following the procedure.

To configure the Sheriff CSM Enterprise Database

1. On the Sheriff Setup menu, use the Tab key to go to Configure Database; press Enter (<OK>)

2. On the Configure Database menu, use the Tab key to select Configure Sheriff Server IP; press Enter (<OK>).

3. In the Enter Server IP Address field, enter the IP address of the Sheriff CSM Enterprise Server; press Enter (<OK>).

   The Configure Database menu appears again.

4. Use the Tab key to select Configure Sheriff Framework IP; press Enter (<OK>).

5. In the Enter Framework IP Address field, type the same IP address you did for the server in step 3. ; press Enter (<OK>).

   The application returns you to the Configure Database menu.

6. Select Back and press Enter until you progress back to the Sheriff Setup menu

7. On the Sheriff Setup menu, use the Tab key to select Apply all Changes; select OK.

   The application prompts you to confirm your choice.

8. Confirm by selecting Yes.

   A progress screen appears showing you that the services are restarting and the percentage of job completion.

9. On the Apply all Changes screen, press Enter (<OK>).

10. On the Sheriff Setup menu, use the Tab key to select Jailbreak System; press Enter (<OK>).

    The application prompts you to confirm your choice.

11. Enter the following command

    grep ^pass /etc/vigilante/vigilante_setup.conf

12. Write down the password to be entered on the Enterprise Server.

13. Enter exit to return to the Sheriff Setup menu.

Task 3: Continue Sheriff CSM Enterpise Server Configuration

To continue the Sheriff CSM Enterprise Server configuration

1. On the Sheriff MySQLSetup menu, in the Enter MySQL Server IP address field, type the IP address of the Sheriff CSM Enterprise Database; press Enter (<OK>).

2. In the Enter MySQL Server password field, enter the password recorded from step Write down the password to be entered on the Enterprise Server above.

   Note: The characters are invisible as you type the password.

3. Press Enter (<OK>) to finish the configuration.

4. On the Sheriff Setup menu, use the Tab key to select Jailbreak System; press Enter (<OK>).

   The application prompts you to confirm your choice.

5. Type the following command

   sheriff-api add_system –-system-ip=<IP-of-Enterprise-Database> --password=<root-password-of-Enterprise-Database>

6. Type exit to return to the Sheriff Setup menu.