Advanced Options | Suboption | Description |
---|---|---|
Scan Type | Ping | Sends a ping to each asset. |
Fast Scan | (Default) Scans the most common 100 ports. | |
Normal | Scans the most common 1000 ports. | |
Full Scan | Scans all ports. It can be slow. | |
Custom | Allows the user to define the ports to scan. | |
Timing Template | Paranoid | Scans very slowly. It serializes all scans (no parallel scanning) and generally waits at least 5 min. between sending packets. |
Sneaky | Similar to paranoid mode, but it only waits 15 s between packet transmissions. | |
Polite | Eases the network load and reduces the chance of system failure. It serializes the probes and waits at least 0.4 s to send the next probe. | |
Normal | (Default) Scans at a rate that achieves the fastest scan throughput without overloading the network or missing hosts and ports. | |
Aggressive | Adds a 5-min. timeout per host. Probe response intervals last no longer than 1.25 s. | |
Insane | Only suitable for very fast networks unless you do not mind losing some information. Times out hosts in 75 s. Waits only 0.3 s for individual probes. Permits very fast network sweeps. | |
Autodetect Services and Operating System | None | Detects services and operating system versions. Enabled by default. |
Enable Reverse DNS Resolution | None | Determines the domain names associated with the discovered IP addresses, normally against responsive (online) hosts only. Enabled by default. |