Up
Previous Next

Sheriff CSM™

Disabling a VPN Configuration

When you disable a VPN tunnel, it does not remove the configuration files and system-generated certificates from the appliance. You can enable the same tunnel again if needed.

If you decide instead to establish a new VPN tunnel on the same Sheriff appliance, repeat the procedures. The system then overwrites the existing configurations.

You can disable a VPN configuration from either the VPN server or a VPN client.

To disable a VPN configuration

  1. Connect to the Sheriff Console through SSH and use your credentials to log in.

    The Sheriff Setup menu displays.

  2. Select System Preferences.

  3. Select Configure Network.

  4. Select Setup VPN.

  5. Select Enable/Disable VPN.

  6. Use the arrow keys to move to "no", press the spacebar to select, and then press Enter (<OK>).

  7. Press <Back> until you are on the Sheriff Setup menu again. Select Apply all Changes.

  8. Press <Yes> to confirm.

    Sheriff CSM applies the changes and restarts all the services, which may take several minutes.

This topic: Sheriff > UserGuides > SheriffCSMDocumentation > DeploymentGuide > VPNConfiguration > DisablingAVPNConfiguration
Topic revision: 07 Sep 2021, SheriffCyberSecurity
Copyright 2020 Sheriff Cyber Security, LLC. All rights reserved.